Radiomaster RP4TD receiver mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small mount for the Radiomaster RP4TD receiver. STEP file to easily add a base. Stack mount also provided.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 341
- Wydruki
- 0
- Wyświetlenia
- 1019
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I created this small holder/mount for the Radiomaster RP4TD receiver. It just slides in and stays via friction. If loose just add a dab of hot glue or similar to the edge of the receiver. I print in ASA .4mm nozzle and .2mm layer height. Could be printed in TPU or PETG as well, but I like ASA for strength and light weight as well as UV resistance.
I provide it in a STEP file so you can add a base for whatever particular airplane mount needed. It works great as-is if you just want to double-sided tape or glue it in. I also made a quad stack mount for 30x30 stacks.