1 / 11
New Extruder Kit for Nicola P. R2 (aka Prusa i3 R2) Upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a good and valid upgrade for old 3d printer made of Nicola P. in Italy in 2014 named "R2" (like a Prusa).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is a good and valid upgrade for old 3d printer made of Nicola P. in Italy in 2014 named "R2" (like a Prusa). This new ender extruder enanche your 3d printer, using a modern extruder system. Try it!
After printed the parts:
- Use a 15x15 aluminium square tube for fix it to retractor (as the original ender block).
- Make the holes using a dima from the stl attached.
- Use a standard MK8 Extruder (from Amazon or Aliexpress at 10$) compatible kit (20x20x10mm with heat and thermistor),
- Use 2x 6mm threads empty inside with a PTFE guide.
- Use a 6mm (20mm lenght) bolt for block the two threads e 1x standard 6mm bolt inside the 15x15 aliminium tube (see the assembled stl file).
- Use a 4mm screws and bolts to fix the parts.
- Use a glue for fix the fan duct to the boxes.
- Use 2x 50x10mm standard fan (left and right) and 1x 40x10mm standard fan.