Ikea Bror Caster Holder V02

This object lets you install casters to a Bror workbench. This is a new
version of my previous design ( http://www.ctheroux.com/ikea-bror-caster-
holder/ ). It is more robust. This design was inspired from the design of Arek
( https://www.printables.com/model/453244-ikea-bror-wheel-caster-mount ). It
is designed for 1-7/8" (48.5 mm) x 2-9/16" (65.5 mm) casters. The holes for
the bolts are 2-1/8" (54 mm) x 1" (25 mm) apart. The bolts I used are 1/4"
(6.25 mm) in diameter, 1/2" (12.5 mm) long.

This object works very well for me. Nevertheless, YOU must make sure that this
object can handle the usage you will make of it. Many factors may contribute
to making this object fail. The quality of the print, the strength of the
casters, and so on. You are solely responsible for using it.

Printing them at 45 degrees will make them way stronger. You'll need to print
2 that has been mirrored. Support material is not needed. An infill of 35% is
recommended.

This object main web page is:  
http://www.ctheroux.com/ikea-bror-caster-holder-v02/.

This object was designed using Solid Edge Community Edition.

You can request the source files on the page listed above.