Bring me the horizon logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One of the first models i ever design please be kind, i tested with PLA
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is printed in two parts, first the bottom and then the top “star” i used glue after printing both of the parts and put a little dot in most corners and then few in the centre. Then i let the model sit for few minutes and boom it was done but the duration of drying depends on what kind of glue you decide to use. So far its only been tested at 100% scale so if you do decide to change it up please let me know how it went. Model uses two colors black and white for the bottom part and just black for the top part.
If you find any mistakes at all with the model or the print please text me and i will try to alter it as best as i can.