Threaded box extender for bagpipe container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed to add 1.5 inch diameter 3 inch log to an existing container for bagpipe pipe
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
I gave my Nephew an empty cat litter container for his small bagpipes. One pipe was a little too long to fit right.
I decided to see if I could 3d print an extender. The extender needed to be solid enough to protect the pipe.
2nd issue was that the container turned out to make a good stool so the extender needed to be easily removable.
I designed it so a hole could be cut in the lid of the container and the extender threaded in in a few seconds. Also could be removed as quickly.
I had only a little problem with the threads that needed a little polishing of edges and now they thread easily.
Feel free to do what you want with this or suggest mods.