AMS hygrometer stand with a voronoi pattern v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I like my original hygrometer stand for the AMS, but it's a little boring. this one was described as "cute".
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this stand is for a small, rectangular hygrometer/thermometer measuring approximately 45mm x 26mm. it's open at the back to allow air flow and battery changes without removing it from the stand. to make it easy to read, it holds the hygrometer close to the top of the front section of the AMS, and has a long base to keep the hygrometer up against the front.
it fits snugly between the feed mechanisms at the front of the AMS, and leaves space behind for bags of desiccant, if required. because of the lip at the front covering the front space of the AMS, you'll have to take out the two spools in front of the gap that you want to put the stand in.
it fits the same hygrometers as my other hygrometer stand.
this model prints without supports if printed face down, and both the 3mf and STL should already be oriented correctly.
as always, I've included a STEP file to make remixes easier.
this version differs from my previous AMS hygrometer stand only in that there's a voronoi pattern cut into the body of the stand, to make it more visually interesting.
v2
I added a feature to make it easier to take out of the AMS