Print in Place Flare Flare Cryptex Lock Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flare Flare Fruit from One Piece Printed in Place model Lock Box Cryptex Torture Test
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 1033
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a Printed in Place Crptex Style lock box in the shape of the devil fruit.
There is subtle text on each of the flames, and an indicator marking where to align the code. The print prints in the solved state, so take note before you free the print. Once you remove the print from the printbed, the inner core should drop down releasing the threaded container in the middle.
No Supports. Supports will cause way more problems.
There is built in supports inside the print that you will break to free 4 rotating moving parts.
Cooling is critical for this print to succeed, there is lots of bridging that is used to complete the print.
You should be able to print with .3mm tolerance or better to attempt this print.
.2mm layer height.
Scaling down is dependent on your printers tolerances, and the Z height should be scaled accordingly to printed scale. (80% size use 80% of .2mm = .16mm)
These models take a lot of filament to make sure work correctly; Please visit my Printables store to support me.
Or support me on my Cults3d store to see a slightly larger selection of models less than 5$ to print.
https://cults3d.com/en/users/DaigleDesign/3d-models