Ender 3 SKT 1.4 + Raspberry Pi 3B+ case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was upgrading my ender-3 with modern features I like on my k1c, so I gave him new electronic box
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The design idea is to have all the wiring on the back side of the case for better airflow. Like modern PC cases are done nowadays.
Design is based around heat inserts (m3x3x4.2) for all parts but raspberry pi mount - I don't have m2.5 inserts on hand at moment of modelling and assembled, so I have m2.5 self-tapping screw size holes there.
But they can be easily expanded with drill for proper insert size if needed or just remodeled.
BOM
- Raspberry PI 3B+
- SKR 1.4 (or 1.4 turbo)
- 1 Frame, 1 Main case body, 2 lids (they are identical)
- 5 M3x3x4.2 inserts for frame mount with 5 M3x6 bolts
- 4 M3x3x4.2 inserts for SKR 1.4 mount with 4 M3x6 bolts
- 4 M2.5x5 bolts to mount raspberry pi
- 2 M4 v-slot nuts and 2 M4x8 bolts to mount enclosure on the left-back beam of the printer
Optional hardware
- Two 4010 fans. Holes are for M3x10 countersink screws
- LM2596 step down module for raspberry pi
- 2 M3x3x4.2 inserts, 2 M3x6 bolts
I've connected RPI and SKR 1.4 using this guide
