Bambu P1P/P1S Toolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu P1-series mystery hole-leveraging tool holder.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 1101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
To save myself from actually measuring the dimensions of the P1 mystery hole, I leveraged just joo' s design. I wanted to hold some specific tools, and I wanted to add some bracing to reduce the deflection of the tool-holdy part. I used PETG for my print.
This is designed to accommodate: Wera hex drivers in 1.5mm, 2mm, 2.5mm, and 3mm; a generic square slot for tweezers, and a larger generic rectangular spot which holds my Klein Tools flush cutters upright by the grip.
Note that printing orientation will make a huge difference on the strength of the oval peg that everything hinges on. Printing it “floating” with supports will be much stronger because the layer lines won't be a weak point.