Resistance Band Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple holder/hanger for resistance bands that attaches to the wall. I printed this with PETG and a fairly…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 1054
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple holder/hanger for resistance bands that attaches to the wall. I printed this with PETG and a fairly high infill percentage, however, if you're good with slicer modifiers, you can increase the infill in the wall-mount flange and have a normal amount of infill in the holder itself.
It can hold quite a few bands, but keep in mind, this should only be used to store the bands, not to workout with.
Print Settings
Printer:
ADIMLab Gantry
Rafts:
No
No
Resolution:
0.2mm layers
fairly high
Filament: Stronghero3D PETG Black
Notes:
I used PETG, but any material should work fine.
Category: Sport & Outdoors