1 / 2
ForYoSa - 3DM
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is one of my retro yoyojam designs for people who want to try out 3d printed yoyos
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I have provided stl files for people who want to try.
All used 0.2mm resolution to print.
Printing notes:
- Please print the cup facing down to avoid bad bearing seat printing
- Support is needed, tree or normal are all fine.
- Print it solid (100% infill or bottom layer 99999)
- Shell wall layer recommend 3 or 4
Yo-yo specs after assemble:
- Width: 41.92 mm
- Diameter: 56.38mm
- Weight 67g to 70g
- Unresponsive
The yoyo requires:
- Body x2 (PLA)
- Shaft x1 (PLA, PETG is recommended)
- Cap x2 (PLA)
Other requirements:
- m4 16mm hex screw x1
- m4 nut x1
- C bearing x1 (Recommend to take the shields off)
- 19mm Pads x2
Installation steps:
- Put the shaft into one of the yoyo body
- Insert the screw from the cup
- Insert the bearing onto the sgaft
- Insert nut on the other body cup
- Screw together(do not over screw!)
- Cap the caps on to the cup
- Done!