Intex compatible sand filter / pump selector valve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement selctor part compatible with Intex pool sand filter / pump
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 782
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement selector valve compatible with Intex sand filters / pumps for outdoor swimming pools.
I printed this part for a friend when the handle of the selector valve broke off (original in picture).
The original part was scanned and modified slightly. It has some errors from the scanning process but should work in place of the original.
Since this part is under load, I reccomend printing it with at least 50% infill in PETG. The part should be printed at an angle with organic supports (this is to make it stronger so it does not brake between layers when used.
The layer height should be 0.2mm or less to ensure good surfaces for the sealing gasket and orings. (a print profile for MK3S+ is included)