Heltec v3 with single 18650 for meshtastic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heltec v3 case that takes a single 18650 battery
- Ocena
- 4 / 5
- Polubienia
- 26
- Pobrania
- 237
- Wydruki
- 0
- Wyświetlenia
- 2800
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.
Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) if you see the case for sale anywhere please reach out.
Case for Heltec v3 board designed with the Meshtastic project (https://meshtastic.org) in mind that takes single 18650 battery.
Has a cutout for the SMA antenna connector so the sma connector doesn't move when you screw or unscrew the antenna.
Required hardware:
1 Heltec v3 Amazon Link
1 protected 18650 battery
4 m2 screws
Meshtastic® is a registered trademark of Meshtastic LLC.
*Please use protected 18650 cells for safety*