Kobra 2 Max Spool Relocation Minimal Hardware Needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Space saving relocation for filament. Not top mounted to reduce stress on z-axis.
- Ocena
- 4 / 5
- Polubienia
- 37
- Pobrania
- 405
- Wydruki
- 2
- Wyświetlenia
- 1700
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original spool holder extends the printers footprint to where it won't fit in most benches or will take up most of the space. There are solutions to relocate over the printer but this adds additional weight to the top of the printer which can cause problems in prints. I happened to have two issues, no room to add a spool on with a top mount, and not enough room for a spool on the side. I designed this setup to use minimal extra hardware. All screws are reused. You will only need two m3 screws to attach the sensor. I used two random screws I found laying around and it still worked great.
You will need the screws that originally came with the printer when packaged, see images for a better description… maybe, I also added some rail supports in case you threw those out it might just slide a bit sometimes, or not im not sure havent tested without those screws so i guess let us know :)