Victorinox SwissCard pocket knife case replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement case for Victorinox SwissCard pocket knife
- Ocena
- 4,5 / 5
- Polubienia
- 44
- Pobrania
- 303
- Wydruki
- 3
- Wyświetlenia
- 2328
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I broke my SwissCard pocket knife case about every 6 months. The small glued joints near the knife seemed to fail first. This is a FDM printable replacement. I have used it for 2 years now without any failures. After printing you can adjust the grip on each tool by warming the outside of the case with a lighter or hot air tool then pressing it in to the installed tool gently. For extra fine adjustment I have gently heated the back of the knife tool and used it to make a small indention over the tool opening to make a retention bump.
A well calibrated printer is required to achieve the small openings needed for this print. Otherwise, no support or other special settings are required.