Prevent door closing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent your door from fully closing without the need for drilling.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 388
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Keep a door from fully closing without leaving marks on your door or doorframe. Handy for when you have kids or pets around.
Can be put on either the side or top of a door without drilling.
- When placed on the side of the door the model is easier to take on and off.
- When placed on top you add the functionality to decide how large you want the minimal opening to be. Just move it closer to or farther from the hinge.
Designed to be printed in TPU. The included helper discs are easily snipped off after printing, meaning no brim is required.
Tested on a Prusa MK4 with:
- kexcelled 95A TPU
- 0.2 structural general flex profile
- 2 loops of skirt
- textured sheet
Print as oriented.
To be used on doors with the dimensions as shown:
Total thickness 39mm
Lining thickness 13,5mm
Rebate height 8mm
If you have a door with different dimensions or without rebate, let me know and I'll happily create it for you.