MX Switch stem holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bigger version of https://www.thingiverse.com/thing:4761144 drawn from scratch. I liked the compliant mechanism…
- Ocena
- 4,857 / 5
- Polubienia
- 21
- Pobrania
- 197
- Wydruki
- 8
- Wyświetlenia
- 1029
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A bigger version of https://www.thingiverse.com/thing:4761144 drawn from scratch.
I liked the compliant mechanism functionality of that model, but it was way too small for me. So I drew it from scratch in Fusion using tominabox1's model as a reference point. The overrall dimensions are similar but not identical.
The "claw" cutouts that grip the stem might need some filing after printing.
UPDATE: 30.5.2021:
Made the stem claw cutouts wider, so the stem base sits flush with the holder, improving grip and stability. Enjoy !
UPDATE: 18.11.2021:
Added another model that has small sacrificial supports on the corners. Print without support, and just snap it off with pliers ! Helps with the problem of corners being curled up during printing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
Yes
.12 to .2mm
Infill:
15-100%
Filament:
PLA -
Notes:
You can increase the grip strength of the holder by increasing wall count.
If the claws dont grip a stem smoothly, file or run an exacto knife through the cutouts to get rid of any extra material left there. Should be a pretty tight fit, but loose enough so that when released the stem drops from the holder.
If you print the one with sacrificial ends, just snap those off afterwards with a pair or pliers, maybe clean up with a hobby knife.
Category: Hand Tools