1 / 2
EliteDesk 800 G3 Mini (and newer) 10 Inch Rack mount Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an adapter for mounting an EliteDesk 800 G3 Mini and newer in a 10 inch rack
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1863
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (43)Powiązane
- I would recommend using PETG since I designed it for needing as little filament as possible.
- You need to print it twice, because it needs to be mounted on the front and the back of the rack.
- It's designed for racks with a depth of 200mm, such as this great 3D-printed one.
- The screw holes for mounting the pc are designed to fit #6-32 UNC screws.
