1 / 1
Carabiner ring on Nalgene water bottle PLA, PETG (stl, step, gcode) — zdjęcie 1

Carabiner ring on Nalgene water bottle PLA, PETG (stl, step, gcode)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printed ring carabiner to use with a Nalgene water bottle, and I made it using PETG.

Ocena
5 / 5
Polubienia
29
Pobrania
226
Wydruki
6
Wyświetlenia
1035
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Carabiner Ring Attachment for Nalgene Water Bottles – PLA/PETG/Nylon Version

A practical 3D-printed carabiner ring designed to secure a Nalgene water bottle to backpacks, gear loops, or climbing packs.

Material Performance:
This model works well with rigid filaments including PLA, PETG, ABS, and Nylon.

  • PLA: Good for general use, but prone to cracking or breaking under sustained heavy tension or impact.

  • PETG: Better durability and impact resistance than PLA, though it still has limits depending on load.

  • Nylon: Recommended for demanding conditions where high stress is expected.

Recommendation: Choose your material based on intended use. Casual carry? PLA works fine. Regular climbing or demanding loads? Go PETG or Nylon.


Want maximum durability? I've designed a separate TPU 95A version with optimized tolerances. TPU's inherent flexibility makes it extremely resistant to stress and impact—ideal for outdoor activities or heavy-use scenarios.

TPU 95A Version →


 

Tagi