W3 and Y3 Radial Engine models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just print the W3 or Y3 configuration, or both.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 140
- Wydruki
- 2
- Wyświetlenia
- 628
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
History
An early radial engine was the three-cylinder Anzani, originally built as a W3 configuration, one of which powered Louis Blériot's Blériot XI across the English Channel. Before 1914, Alessandro Anzani had developed radial engines ranging from 3 cylinders (spaced 120° apart) — early enough to have been used on a few French-built examples of the famous Blériot XI from the original Blériot factory.
Printing
The crankcase and piston rods are printed with support on build plate.
I printed with PLA+, layer height 0.16 mm.
Dimensions 116 x 70 x 110 mm.
Weight 0.060 kg.
Assembly
- Assemble and glue the crankshaft cheeks with the piston rods in place.
- Assemble the pistons to the piston rods using the piston pins.
- Click the assembled crankshaft with the pistons in the crankcase.
- Glue the bearing to the backside of the crankcase.
- Glue the crankcase lid to the front of the crankcase.
- Assemble the cranked handle and place or glue it to the back or front of the crankshaft.
- Place or glue the knob to the back or front of the crankshaft,
Operation
Use the cranked handle or the knob to turn the crankshaft.