1.26 Inch Magnet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Magnet Holders to Hold 1.26 Inch Round Magnet from Amazon
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 99
- Wydruki
- 2
- Wyświetlenia
- 377
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The magnets alone are extremely hard to remove once they are placed on a metal object. I designed these holders to give you a little more grip making it easier to remove them. They are specifically designed to hold down objects on a Laser Engraver Honeycomb Bed, more specifically 3mm and 6mm high stock.
I used ASA but I'm sure any filament would work fine. I used 35% Infill. I printed these flat on the bed, upside down. You will need supports. These are press fit tolerances so your 3D printer needs to be tuned correctly. If not you'll need to print and test fit, then adjust size as needed.
Link to Magnets
DIYMAG 8 Pcs Neodymium Round Base Cup Magnet, 110LBS Strong Rare Earth Magnets with Heavy Duty Countersunk Hole,Stainless Screws,Iron Sheet for Refrigerator Magnets,Office,etc-Dia 1.26 inch-Pack of 8 https://a.co/d/0fmcHR6y