1 / 8
ADXL345 mount for Artillery Genius / Sidewinder X1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Artillery Genius / Sidewinder mount for the ADXL345 accelerometer
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 2244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (41)Powiązane
Mount for the ADXL345 accelerometer: attach to a ribbon cable strain relief with two M3 bolts (I used M3x20, will probably replace them with shorter ones at some point).
Standoffs not mandatory, but will hopefully prevent the nut from touching any components.
Provided stls (they have different distances between the outer holes):
Artillery Genius strain relief
- genius_adxl.stl
- x1_svandru_adxl.stl
- x1_hara74_adxl.stl
Printer:
Artillery Genius
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
Any
Filament:
Any