Helical gear for Dewert actuator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the helical gear for a Dewert linear actuator used in many medical beds. (Will upload model code asap)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is the helical gear for a Dewert linear actuator (will upload the model code when I'll find it out). I printed this in PA-CF to achieve enough strenght to resist the movements of a medical bed. Print a test and stress it out a lot to know if the printed gear will last, considering the multiple movimentations and the weight applied.
Print Settings
Printer:
BambuLab P1S
Rafts:
No
Yes
Resolution:
0.16
35%
Filament: Treed Healthfil Structura MA PA-CF
Notes:
Supports are needed to print the gear, but be sure not to have supports on the inside of the hole.
Do not exceed 0.2mm resolution or it will result in a bad screwed part inside.
Category: 3D Printing