RV Screen Door Handle Installation Jig and support channels.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The make it easy to mark, drill and attach you RV Screen door aftermarket handle.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
I have watched so many videos of really bad or failed RV Screen Door Handle installations that I had to do something. I modeled the channel of the screen door so that 3d printed part can be used to elevate the position and the allow a second section to be snapped it as well. The top section has holes in the front that align with the holes in the screen door handles end caps. Pop the spacer in, then the part with the holed snapes in above it and now you can easily drill the holes. Assemble the crossbar and now the end caps will just screw on going into the metal as well as the backside of the jig, making for an extremely secure door handle. I will post more pictures after I have my trailer where I can get to it easier.
When setting up the slicer just pick the spacer (if needed) and the Helper Base, copy them and mirror them to get the right sides. If you need me to make them I can. Then slice all at once using a brim to secure it to the plate.
The spacer can be changed for height in the slicer as well.
I do not suggest making the Helper Base any longer or you wont be able to snap it in. It really makes a pop so be prepared. A flathead screwdriver will easily remove them.
https://www.youtube.com/channel/UCTN2J1SbFzJWI-ACaXzghNA