Dragon Claw Talon Nerf Magazine - Pad's remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Dragon Claw Nerf Half-Dart magazine - Talon compatible!
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 210
- Wydruki
- 1
- Wyświetlenia
- 1727
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've been running DJ_Designs's brillant Dragon Claw Talon mags with conventional metal compression springs and have been able to push the capcity up to 17 darts- this made the “14” markings inaccurate and I wanted to fix that.
I used the spring from the XShot Pro 15 round half-dart mag as a reference and formed my own springs using 0.610mm piano wire and this spring bend guide.
Included are two variants- one with no text and one with a “17” round marker.
Note: I recommend printing the follower in PETG. PLA tends to be a bit too “sticky” and gets stuck. The body can be printed with PLA or PETG, I haven't tested ABS.