Alternate disk drive mount for MASS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a different model for mounting disk drives in MASS.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 811
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an addon for Haydn Baos ITX NAS case called MASS.
This part can be used to mount a 3,5" HDD and a small SSD in the PSU compartment if used with an external PSU instead.
It mounts by using longer screws in three of the motherboard positions. Replace the nut with a printed spacer and place the nut on the outside of the disk mount instead.
This model was specifically made to use with the stripped SSD I had lying around so it is unlikely to work out of the box for anyone else, but an F3D file is included to make suitable modifications for your needs.