1 / 1
Set of dowels for Rocco's Vault with Pin Tumbler Lock — zdjęcie 1

Set of dowels for Rocco's Vault with Pin Tumbler Lock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print all the necessary dowels as replacements for the quite expensive metal dowels.

Ocena
4,5 / 5
Polubienia
20
Pobrania
213
Wydruki
2
Wyświetlenia
654
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A total of 21 dowels with different lengths are required for the assembly of Rocco's vault.
Quite expensive if you use metal dowels. Therefore, I have designed all the dowels exactly according to the given measurements. In my opinion, they work just as well as the expensive metal dowels.

And one more tip: You don’t need to buy the metal springs either. I simply used a spring from an old ballpoint pen and cut it into three equal parts.

 

Printing information

The STL file is correctly aligned.

First Layer: 0.20
Layer height: 0.10
Perimeter: 3
Infill: 100% 
Support: none

 

I am looking forward to your Makes! :-)

If you like this design, feel free to check out my others here.

Tagi