The Beast: universal cupholder for strollers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal cupholder with compliant mechanism and quick-swap system. Easy to upgrade!
- Ocena
- 4 / 5
- Polubienia
- 147
- Pobrania
- 260
- Wydruki
- 2
- Wyświetlenia
- 3962
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
The system contains two cupholders:
- The Beast - named after its monstrous appearance, works with a gravity-triggered locking mechanism and lets you hold most sizes of beverage containers (from a very small coffee cup to a large pint of beer)
- The simple one - a very simple cupholder designed for a 0.5l can or similar size.
Both cupholders are attached to the stroller with a quick-swap system - this allows easy upgradability as you may design your cupholder just with screw holes and use my quick-swap system to attach it.
The “stroller frame holder” part is designed for the Kinderkraft Prime Lite 3 stroller. If this part doesn't fit your stroller, you might need to redesign it.
You will need several M3 screws and nuts of various sizes, as well as some springs and a short piece of 8mm aluminum tube. I will update the numbers and lengths of the necessary materials.
Printing setup:
- Print all parts with PETG.
- (Optional) Print “Stroller_frame_holder” and “Cupholder_base” with PC Blend or similar highly resistant material. These are the most stressed parts.
- Set as many perimeters as possible (at least 4) to achieve the highest possible resistance.
Materials:
- M3 screws
- M3 nuts
- M3n Nyloc nuts
- 6 springs
- aluminum or metal tube (8 mm outer diameter, 6 mm inner diameter)
- Superglue