Grappling Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Its a fairly simple hook that can be used for grabbing thinks like ropes and other things.
I have designed it that you dont need any screws, so that you can print it and start asembling it right away without looking for screws.
It can be Printed fully without using supports. I printed it with 100% infill, but ou can try using less if you want to(just be aware that it might break faster ;-)
If you have finished Printing it out, you can start asembling it, i hope everything is clear to you, if not, dont be afraid to ask.
After you have inserted the bolts, put your hook into a vise and start clamping the bolt gently together, by doing that you flatten the small end, after that the bolt is fully secured and keeps the hook together.
At the top put the shackle into the holes, after doing that, use just a small amount of super glue to glue the shackle at the connection point together.
Thats it. Your hook is now assembled.
If you want that your hook closes automaticaly you can use one or two small O-rings and put them were the two notches are.
Happy Printing!!