1 / 4
Siku Control 2466 /Gap filler for conveyor belt — zdjęcie 1
1 / 4

Siku Control 2466 /Gap filler for conveyor belt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It is a gap filler for the side gaps of the conveyor belt, so that nothing can get in.

Ocena
0 / 5
Polubienia
3
Pobrania
38
Wydruki
0
Wyświetlenia
442
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

You can simply place it next to the rollers, as shown in the picture above. It serves to prevent any transported material from getting inside, so that the conveyor belt does not come to a standstill.

I printed it from PLA with a height of 0.2 mm.

If you have any suggestions for improvement, please write them in the comments.