Philips Hue Dimmer Switch adapter to Schneider Exxact light switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows installation of Hue Dimmer Switch on top of Exxact light switch without permanent modifications
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Pictures tell the story - use this to nicely integrate Philips Hue Dimmer Switch to an existing Schneider Exxact light switch without permanent modifications.
Installation
Remove the original Schneider Exxact components: Button, part that retains the outer face, and the outer face. Leave the switche's body and electrical connections in place. Use screws to install the printed part on top the bare Schneider switch. The inner screw holes are for this purpose. Use short screws to install the Hue Dimmer Switch base on the printed adapter place. Ensure the screws are short enough not to damage your wall. Clip the Dimmer Switch cover on the base, and you are good to go!
Printing instructions
Orientation: Flat surface on the bottom
Supports: Not needed
Layer height: 0,15mm or 0,20mm
Material: PLA, PETG
Infill: 15%
Raft: Not needed