1 / 4
Pineapple Hitch Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I used PETG for the receiver part and PLA for the pineapple part. For 2 colors like in my pictures, change colors at about 6.5mm.
Best results with the receiver were at a 45 degree angle with brim and supports. That made the button parts the strongest. Optionally it can printed with the knobs on the plate and using much less support. That makes the buttons weaker with the layer lines being right at the stress point but it should be fine if you're not using them all the time.