Viture One / Pro XR Cable Organiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cable organiser to be able to more easily close the magnetic cable flap
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 461
- Wydruki
- 5
- Wyświetlenia
- 1688
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Repost of the fantastic cable organiser for the Viture Pro, originally by spark3dprinting on Thingverse.
Wanted to get a copy on Printables to create a Viture AR glasses collection.
Note: original design was intended for printing in PLA. I've printed it in TPU and thought it worked fantastic, with the added bonus of being a little softer on the cable and with a little more give.
from the original listing:
A problem I had with the Viture Pro case is that the cable is always too loose and ends up making the magnetic flap unable to close properly. This organizer allows you to wrap up the cable nicely so that the flaps can close with proper clearance thus reducing the stress on the glasses themselves.
The height is designed so that the flap will always close properly when the cable is wrapped.
Make sure to print with 10% or less infill so that it's not too heavy.