Toolholder for dentaldrills and accesories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little toolholder for dentaldrills and accessories. Suitable for drills with a diameter of 2mm
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I created a little toolholder for my drills and couple other stuff I need for work.
It's suitable for drills with a diameter of 2.5mm, grinding wheels with a diameter of 39mm and 22mm, rubber wheels with a diameter of 21mm, rubber rods with a diameter of 6mm and 3mm, polishing wheels with a diameter of 27mm, one sided grinding discs with a diameter of 21mm and scalpel packs of 10mm x 71mm.
You should maybe scale the whole thing in your slicing software a couple percent up, depending if you got your tolerances right.
I needed to make the holes a little bit bigger by hand, because i haven't.
The spare place could be good for a name or a logo.
Made with Blender and printed on an Elegoo Neptune 4 Pro
Filament used: 32.6484m
Layer height: 0.2
If i remember right i used 30% infill.