BFight 210 Slide On Motor Protector 22-23xx
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a motor protector i designed for the BFight210 or BFlight210 Frame.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — NoDerivatives
This is a motor protector i designed for the BFight210 or BFlight210 Frame.
It can easily be mounted securely by using just one little zip Tie.
I designed it to be used with the Brotherhobby Returner R5 2306 Motors but should be a good fit as well for any 22-23xx motor
There are 2 versions in 30 and 31.5mm inner diameter.
Leave a like and share your makes if you find this useful ;-)
Print instructions
Category: R/C Vehicles Print Settings
Printer: Kossel XL
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 10-15%
Notes:
Print this in TPU with 1 or 2 Perimeters.
It has been designed especially to be printable without support
How I Designed This
This was designed using a scan of the actual Arm in Fusion 360