GEPRC Mark5/4 28mm GPS mount (BE280)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GEPRC Mark5/4 GPS mount for 28mm square modules such as BE280 (full list in desc.). With TBS-style VTX-antenna mount.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 1124
- Wydruki
- 1
- Wyświetlenia
- 3101
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
28mm GPS mount for the GEPRC Mark5 and Mark4 FPV drone frame. The VTX antenna mount is for TBS-style antennas, and the receiver antenna mount is for standard T-antennas.
My reason for using a 28mm GPS instead of the usual 18–25mm one is as follows:
Generally, larger GPS modules are able to get a 3D ‘fix’ quicker and can lock onto more satellites, giving a more accurate and stable position reading. Though the quicker fix is more important for FPV drones.
This convenience easily offsets the small weight penalty for me.
Compatibility:
Most 28mm-square modules will fit. A few examples:
- Beitian BN/BK/BE280 &
Beitian BN/BK/BE880 &
Beitian BN/BK/BE880Q- BN = M8, BK = M9, BE = M10 (recommended)
- GEPRC GEP-M1025 Series
- the 25 is the size of the patch antenna, the module itself is 28mm
- Quescan M10FD & G10A-F30
- V.KEL VK2828U7G5LF & VK2828U8G5LF
I use the BE280. It gets over 8 sats within 30-60s and usually 20-35 sats after a couple minutes.
Printing:
- When importing the 3mf, choose “3D models only”
- Material: TPU
I like 95A, or even harder. - 3 Perimeters
- 25-40% infill
- Supports: yes
- Style: grid
- on build plate only: OFF