Articulated Kangaroo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An articulated Kangaroo with 12 joints that prints in place.
- Ocena
- 4,833 / 5
- Polubienia
- 193
- Pobrania
- 1202
- Wydruki
- 6
- Wyświetlenia
- 3359
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
An articulated Kangaroo with 12 joints that prints in place without supports.
No assembly required except for the removal of the 2 supports included in the model (for tail and neck).
About 18 cm (7 inches) in length depending on how you measure. Robust and fun to play with.
The complex shape of the first layer requires good bed adhesion, so clean your plate and consider adding a brim.
If you enjoy this model, please like and post a make.
Enjoy!
This Kangaroo is the third model in my Flexi-animal series. Please have a look at the other models, the Articulated Giraffe and Articulated Elephant!
Articulated Elephant (Print-in-Place) by kida | Download free STL model | Printables.com
Articulated Giraffe (Print-in-place) by kida | Download free STL model | Printables.com