NanoBlade skalpel no 11
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smallest pocket knife i could come up with.
- Ocena
- 4 / 5
- Polubienia
- 20
- Pobrania
- 171
- Wydruki
- 1
- Wyświetlenia
- 678
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Boring entry
Hi! Soooo i was bored and thought to make something.
Idea landed on making smallest and still comfortable to use blade i could think of.
NanoBlade was born and now i can present it to you.
For assembly
all you need is scalpel No. 11 and about 2mm peace of 1.75mm fillament (PLA/PET) and pair of pliers
Printing
Designed for line width of 0.45mm (And yes it works with 0.4 nozzle)
Use PETG but should work with PLA
Print with 100% infill and first layer hight 0.2mm others 0,1mm
Warning
Watch out for a scalpel, its sharp (no shat) and u can easly can penetrate hand to the bone when assembling it carelessly
Assembly
Grab your Scalpel No. 11 with pliers and push it into slot on handle pt 1, when slot on a scalpel goes over locking knob of handle pt1 push scalpel down untill it snaps into plcace. Then (using pliers) push scalpel further untill slot on a front of the scalpel isnt vissible.
Snap handle part 1 and 2 together (pt 1 might need some deburring on rotation axis hole, it depends on your printer)
Take about 2mm peace of fillament and squash it as much as you can with pliers to create a wedge, push a weage into a cross on rotation axis on pt 2.
And now you are a owner of NanoBlade
Disassembly
Dont bother just print new pt1, u might reuse pt2 if its in a good shape but i wouldnt bother with it. Its a fast print.
thats all
Have fun NOT stabbing people