FTO Cube Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a FTO (Face turning octahedron) stand that I made based on the cube stands that I have.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Share Alike
I modelled the cube stand I have from ziicube and modified it to fit an octahedron, any octahedron puzzle should fit, though if its really large it might become wobbly or unstable.
I used supports and a brim, the brim is probably not necessary but there is a small contact point in the middle that got separated on my first print attempt.
Since it has a square cut-out in a triangle stand it does have a front side.
I have tested with the diansheng magnetic fto and it works well, about as stable as a 3x3 on a regular cube stand.