1 / 11
Modulare Trellis / Rankstangen / Plant Support — zdjęcie 1
1 / 11

Modulare Trellis / Rankstangen / Plant Support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One of my plants on the balcony has swung around the crank of my awning and as I would like to have shade on my balcon

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

 

Englisch (German is below)

 

That's how these climbing poles came about. 
They are easy to print, completely modular and can be assembled according to your own requirements.

Each pole has a small notch on both sides which marks the insertion depth. A fingernail can easily be inserted into these and pushed in to the end.


The connectors are in the profile:
2x elongated connector
2x curved connector
2x T-connectors
2x cross connectors.

 

2. Profile
variouse 3D Connections

 

Poles
4x 150 mm poles
2x 150 mm poles with pointed end to drive them into the ground

4x 100 mm poles
2x 100 mm poles with pointed end to drive them into the ground

 

This allows the model to be extended in both directions.
The tolerances are selected so that the model holds on its own.
If you are not sure, you can glue the connectors and the rods with a drop of glue.

 

If you let the pressure plate cool down a little, the supports of the connectors come off super easily from the pressure and with a small pair of pliers the supports can simply be pulled out of the tubes.

 

 

German 

 

Eine meiner Pflanzen auf dem Balkon hat sich um die Kurbel meiner Markise geschwungen und da ich gerne Schatten hätte auf meinem Balkon, wollte ich ihr eine Ausweichmöglichkeit geben.

So sind diese Rankstangen entstanden. 
Sie sind leicht zu drucken, komplett Modular und nach den eigenen Bedürfnissen zusammensetzbar.

Jede Stange hat eine Kleine Kerbe auf beiden Seiten welche die Einstecktiefe markiert. In diese lässt sich leicht der Fingernagel einstecken und bis zum Ende reinschieben.


Im Profil sind die Verbinder:

2x Länglicher Verbinder
2x Kurven Verbinder
2x T-Verbinder
2x Kreuzverbinder

 

2. Profil
verschiedene 3D Connections

 

Stangen
4x 150 mm Stangen
2x 150 mm Stangen mit Spitzem Ende um diese in die Erde zu treiben

4x 100 mm Stangen
2x 100 mm Stangen mit Spitzem Ende um diese in die Erde zu treiben

So lässt sich das Modell auch in beide Richtungen erweitern.
Die Toleranzen sind so gewählt, dass das Modell von alleine hält.
Wem die doch zu unsicher ist, kann die Verbinder und die Stangen mit einem Tropfen Klebstoff verkleben.

 

Wenn man die Druckplatte etwas abkühlen lässt, lösen sich die Supports der Verbinder super leicht vom Druck und mit einer kleinen Zange lassen sich die Supports einfach aus den Rohren ziehen.

 

Todo:

Mehr Konnektoren um das ganze auch im 3D Raum aufbauen zu können. Also in XY und Z Richtung zu weitern.

 

 

Tagi