Solaredge inverter cooling system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling system with 3 x 60mm fans and W1209 thermostat.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 665
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cooling system with 3 x 60x15 mm fans and W1209 thermostat with sensor. It allows you to reduce the inverter temperature by approximately 10 degrees Celsius.
Mounted with 2 screws to the wall, does not interfere with the existing installation.
The thermostat reads the temperature from a sensor located in the inverter heat sink and turns on the fans when needed, in my case above 30 degrees Celsius, 12V connection required.
The cover with fans is attached to the base using small round 5x5 mm neodymium magnets in matching holes, the thermostat holder doesn't need them.
Perhaps this design can be used to cool other inverters.