Sandpiper Snow Ski and Rear Tires
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optional Snow Ski kit
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 146
- Wydruki
- 1
- Wyświetlenia
- 767
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Snow Skies for SandPiper
Video below by- Holly RC and Printing - Holger Averes.
SandPiper sand rail here https://www.printables.com/model/933688-sandpiper-18-scale-baja-race-buggy-2wd-rear-engine
The ski mounts have a cavity in the back to add weights. This is an attempt to keep the ski tips from dipping too much when airborne. PLA should work well with snow. The tires can be printed in TPU with varied results.
Note: The tires are not optional for snow. They tend to dig or slip. A good knobby carpet tire seems to work best on snow.
Ski Hardware
6x- M2 x 12mm
Printable Wheel and Tire Hardware
PLA 5x- M2 x 10mm
or
TPU 10x- M2 x 10mm
Wheel for Pro-line tire:
1/10 Hole Shot 2.0 M3 Front / Rear 2.2"/3.0" - A
Prism T 2.2 - 2.08 x 401 - B