K1 and K1C Filament-Out side mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mounts the filament-out sensor above the spool when mounted on the side wall of the printer.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 365
- Wydruki
- 3
- Wyświetlenia
- 1328
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
When a filament spool is mounted on the side of the K1C / K1 using Creality’s printable spool side mount the filament tends to drag on the spool increasing drag unevenly. This project mounts the filament-out sensor above the filament spool when mounted on the side of the printer, eliminating this drag. This part can be mounted at one of two angles. The first option works well with Creality’s side spool holder and the second option provides better filament alignment with some of the more comon filament heater box options. This part also is compatible with the existing filament sensor screws allowing them to be used. Two additional M3x8 screws are needed to mount the part on the side of the printer.