Yeethammer smoother bolt pull
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slight geometry adjustment to make priming the yeethammer smoother
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 227
- Wydruki
- 3
- Wyświetlenia
- 1345
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I noticed that when priming the Yeethammer it would get stuck towards the end if I didn't pull with enough force. This was a result of the geometry of the “track” in the “cam-track-fore-l/r” parts requiring more force towards the end of lifting, so I tweaked it a little bit:
As you can see, not a huge difference, and I don't claim the new geometry is by any means optimal (I eye-balled it), but it make a big practical difference, way easier to pull the bolt the last bit without slamming it.
Doesn't change the angle the breach opens at.
Print the same as the regular cam-track-fore components