Spice Rack for 40mm Jars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Hana Matenova's design to suit Australian spice jars which are 40mm deep
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 410
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I loved Hana's design. it's very elegant. Unfortunately Czech spice jars are much bigger than the ones we use in Australia.
Being smaller jars, I don't think we need the middle support and I reckon we could get away with 6mm dowels. Using a single dowel size is easier to shop for and reduce waste.
My Spice Rack
I bought 1* 8mm x 2.4m & 1* 6mm x 2.4m dowels, cut them into 400mm pieces to create 3 racks.
They hold 9 jars with room leftover. The bracket will take up to 10mm of dowel. So for a perfectly snug fit you would want to cut your dowels at 380mm
Improvements
After mounting my first design, I thought I'd make a couple of improvements and share them to the community.
- Changed the 6mm dowel hole from 6.4mm to 6.2mm
- Increased the height of both rails slightly for more stability. Hopefully leaving enough gap to read the labels on each jar.
- Created a middle support piece
- Created a 6mm only version
These have not been printed, and at this stage I don't think I need another rack.
I would suggest printing the 6mm version, let me know how it goes. If you don't want to be a guinea pig then choose the ‘printed’ version
This was made in onshape if you want to edit it.