Beaglebone Breadboard Mount for Parallax BoeBot

This is a mount to attach and hold in place a Beaglebone and a half size breadboard and mount it to a Prallax Boebot aluminum robot chassis. This mount can also be used standalone to hold your Beaglebone and a breadboard in place for building projects, prototyping, learning, etc. The breadboard is mounted solely by friction, it fits in rather snugly. The Beaglebone is screwed down using M3X10mm screws treaded into the holes on the mount's standoffs, to protect the soldermask on the Beaglebone from the stainless steel screws I included printable screw spacers/washers to put on the screws before threading them into the mount.

Print at 0.2mm layer height, I print with 3 walls but you should be able to get by with thinner

Specs:

• Supports Beaglebone Green and Bealgebone Black sized Beaglebones, should be enough clearance for all variants
• Holds half size breadbaord both kinds, the ones with rounded tabs and trapizoidal tabs can fit.
• Optional screw mounting holes for mounting to Parallax BoeBot robot chassis.

• Printable spacers/washers to protect soldermask of Beaglebone from mounting screws Hackaday.io Project Page https://hackaday.io/project/16657-beaglebone-black-and-breadboard-plate Print Settings

Printer:

Monoprice Maker Architect (Replicator 1 Clone)

Rafts:

**Supports:**

Doesn't Matter

Resolution:

**Infill:**

45%

Notes:

Category: Electronics