Holster for airsoft MP9
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holster for airsoft MP9 with quick release
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 244
- Wydruki
- 1
- Wyświetlenia
- 1937
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a QD holster for an airsoft MP9, it uses a 3 point mount.
It works by using the barrel tip and trigger guard to lock in place, thus it is not possible to use a barrel or side rail attachment. Both the A1 and A3 versions work.
Print with at least 80% infill for extra strength, orient parts to print with minimal supports.
Note that the holes for inserts and bolts may need some work to fit, preferably using reamers (regular drills can be used, but be careful of over drilling since especially the QD mechanism has features that can easily be destroyed).
Refer to the STEP file and pictures for assembly.
Parts list:
Bolts: 2x M5x50mm, 2x M5x45mm, 1x M5x40mm (partially threaded), 1x M5x16mm (flat of oval head shape), 3x M5x10mm (for 3 point mount)
Nuts: 1x M5
Inserts: 8x M5 brass (6,4x9mm, the ones that narrow at one end)
Springs: 2x 7x19mm 0,5mm wire or comparable (1x 7x40mm …)