Astronaut Cat Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HI Everyone! Hope You All Enjoy This Newest Addition- Grayscale Astronaut Cat https://patreon.com/DENUSA
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 201
- Wydruki
- 4
- Wyświetlenia
- 1162
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
HI Everyone! Hope You All Enjoy This Newest Addition- Grayscale Astronaut Cat.
OUR WHOLE COLLECTION IS AVAILABLE FOR PERSONAL AND COMMERCIAL USE THROUGH SUBSCRIPTION TO OUR PATREON.
https://www.patreon.com/DENUSA
We are including Two Versions, the finished and colored 3mf file ( A1 Selected, just change to desired printer).
The Second version is just the STL, the information will be below
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x164.24mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Gray
At layer #18 (1.52mm) swap to Jade White for the rest.