1 / 4
SmartTag2 housing for Xiaomi Scooter 4 PRO gen2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Under reflector housing for Samsung SmartTag2 used for Xiaomi Electric Scooter 4 PRO 2nd Gen
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 750
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Minimalistic “as it could be” mount for Samsung Smart Tag 2 uder Xiaomi Scooter 4 PRO gen2 rear reflector.
If your printer does not have tight tolerances, you may use doublesided tape to hold tag down still.
It mounts under original reflector, you only need longer M4 bolts (M4x20 should work). To secure it in place is good to use some threadlock, original screws are also secured like that.