1 / 1
Horseshoe Lock - Topology Puzzle (fusion360) — zdjęcie 1

Horseshoe Lock - Topology Puzzle (fusion360)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3d model of a horseshoe lock puzzle. It's a nice way to play around with topology in math.

Ocena
0 / 5
Polubienia
7
Pobrania
80
Wydruki
0
Wyświetlenia
417
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The model prints into 3 separate parts that should be printed flat on the bed with an eventual brim.

You will also need 2 strings of about 10cm to assemble the puzzle. Make loops with the strings that pass through the holes of the horeshoes to connect both. Make sure both loops go through the center of the torus (see img). 

 

My model is based upon a viral video, the earliest mention that I could find in a reasonable time was here: https://www.tiktok.com/@storyandmovieclips1/video/7383716037956619552 [23/06/24].

Tagi